02 — 제품 포트폴리오
건축용 유리 포트폴리오
Nine architectural glass families — specified, sourced and inspected to international standard. Every family is available tempered, laminated or as an insulated unit where the specification requires it.
- Assembly: Outer lite — Tempered or laminated; Low-E coating — Solar and thermal control; Cavity — Argon or krypton fill; Spacer — Thermoplastic, desiccant filled; Inner lite — Dual-seal edge: butyl / polysulfide.

- Assembly: Compression zone — >69 MPa surface (EN 12150); Tensile core — 120–200 MPa bending strength; Compression zone — Granular break pattern.

- Assembly: Outer lite — 3–10 mm; Interlayer — PVB or SGP, 0.38–1.52 mm; Inner lite — 3–10 mm · STC 34–52.

- Assembly: Ceramic frit — Screen printed pattern; Fusion — Fired into the surface at 620–680 °C; Substrate — Tempered lite, 4–19 mm.

- Assembly: Tempered lite — Loaded to the chamber; Soak cycle — 290 °C ± 10 °C, EN 14179-1; Hold — Minimum 2 hours at temperature; Released batch — <0.1% residual breakage.

- Assembly: Panel — Up to 16,000 × 3,300 mm; Section — 15–200 mm thickness; Build-up — Tempered, laminated or insulated.

- Assembly: Outer lite — Bent to project radius; Interlayer or cavity — Per specified build-up; Inner lite — Formed to matching template.

- Assembly: Relief face — Three-dimensional kiln-formed surface; Body — 10–50 mm section; Mould face — Custom refractory mould, above 800 °C.

- Assembly: Rolled face — Engraved roller texture; Substrate — Clear or low-iron, 3–8 mm; Processing — Tempered, laminated or in an IGU.

Nine material families기술 데이터 요약
Portfolio download
건축용 유리 포트폴리오
Thirty pages covering the nine glass families, technical data, project references, certifications and the full trading and project service.
한국어 포트폴리오 다운로드 — PDF · 44 MB · 30 pages- Format
- Extent
- 30 pages
- Language
- 한국어
